Wireless Networking

2008-09-12T13:50:30Z

61.75.192.23: /* Linksys */

Very funny pictures

Northern Virginia Voters Chime In washingtonpost.com/wp-dyn/content/video/2008/09/11/VI2008091102914.html

Cindy McCain's battle against prescription drug addiction has been part of her public speaking points for years, but a deeper investigation reveals the far-reaching consequences of her actions washingtonpost.com/wp-dyn/content/article/2008/09/11/AR2008091103928.html

Candidates Promise National-Service Initiatives washingtonpost.com/wp-dyn/content/article/2008/09/11/AR2008091103788.html

Palin Links Iraq & 9/11 | McCain: Link Is 'Naive' voices.washingtonpost.com/the-trail/2008/09/11/palin_endorses_idea_mccain_cal.html

==== Netgear ====

===== Netgear WG111 =====

<b>Configuring the WG111 to use WPA-PSK on a wireless network</b>

This card works very well in Knoppix 3.9 using ndiswrapper, but is as of yet untested in other versions of Knoppix (to my knowledge).

*'''Commands:
Assuming that the drivers are on the cd in /dev/cdrom, then
mount /dev/cdrom/ /mnt/cdrom/

Find '''ndiswrapper configuration''' under Knoppix->Network/Internet and select '''netwg111.inf''' from '''/mnt/cdrom'''. After that finishes, create the configuration file that you will need shortly using the following command:
wpa_passphrase MySSIDHere MyPassphraseHere > /home/knoppix/wpa_supplicant.conf
Now, use your favorite text editor (if you don't have one, try Kate under the menu item '''Editors''') and edit the
'''/home/knoppix/wpa_supplicant.conf''' you just created (see sample below).

With that completed, run the following command. '''Warning:''' As it is, the command will monopolize your current command window with potentially useful debugging output, including your encryption key; add '''-B''' if you would rather run it in the background (useful when you know it works already), remove '''-K''' to hide your key.
sudo wpa_supplicant -ddKt -i wlan0 -c /home/knoppix/wpa_supplicant.conf -Dndiswrapper

The following grabs an IP address if you use DHCP from your router.
sudo pump -i wlan0

And finally, tell Knoppix where to go to find the internet.
sudo route add default gw ''<Gateway/Router IP address here>''

*'''wpa_supplicant.conf
Note: the bold lines were added in the editing steps for my Linksys WRT54G Router to accept the card. See the Useful Links at the end for a full explanation of all options that can be put in here.
'''ctrl_interface=/home/knoppix/wpa_supplicant
'''eapol_version=1
'''ap_scan=1
network={
ssid="MySSIDHere"
'''scan_ssid=1
#psk="MyPassphraseHere"
psk=''hex representation of the passphrase
'''proto=WPA
'''key_mgmt=WPA-PSK
'''pairwise=TKIP
'''group=TKIP
}

*'''Useful Links:

[http://www.knoppix.net/forum/viewtopic.php?t=12351 Wireless card success story (where I located the ''pump'' command)]

[http://hostap.epitest.fi/cgi-bin/viewcvs.cgi/*checkout*/hostap/wpa_supplicant/wpa_supplicant.conf?rev=HEAD&content-type=text/plain Example wpa_supplicant.conf with full explanations and various configurations]

-bobeltomate

tiscali broadband and networking home business uk only
unlimited 8mb from £6.49 per month. Earn money from promoting tiscali.

http://www.tiscali-network.com/fastbroadband

uk sites only please to test your service out....to see if i get any referrals directly from your postings

thank you.

Knoppix Documentation Wiki - User contributions [en]

Wireless Networking